Please, insert a valid input in "Alarm on digin" field"
| Parameters | Value | Description |
|---|---|---|
| Position | Position of the cabinet in signed degreees eg. Amplex: '56.157,10.193' These can be taken from, or entered into maps.google.com eg: http://maps.google.com?q=56.157,10.193 |
|
| Timezone | Timezone of the cabinet. Only used for alarm texts: eg. 'CET-1CEST-2' See http://en.wikipedia.org/wiki/Time_zone and http://www.di-mgt.com.au/wclock/tz-syntax.txt |
|
| Sunrise offset | Offset from sunrise in minutes to turn light off eg. '-30' | |
| Sunset offset | Offset from sunset in minutes to turn light on eg. '30' | |
| Alarm on digin | Set to 1 or 2 (normally open) if eg. a door switch is wired to digital_in | |
| Alarm on digin text | Text to send when digital in alarm triggers | |
| Doorswitch on phase4 | Set to 1 if a door switch operated lamp (230V) is wired to phase_4 | |
| Phases wired | A comma separated list of phase inputs to monitor (1-3) eg. 1,2,3 | |
| Photocell digital | Set to 1 if a digital photocell is wired to digital_in (closed when lit) | |
| Photocell threshold | Set to lux threshold if a ServoDan 43-198 photocell is wired to analog_in_1 | |
| Photocell active zone | Number of minutes before sunrise/sunset the photocell is enabled | |
| Currentsensor wired | A comma separated list of wired current coils (1-6) eg. '1,2,3' | |
| Leakage threshold | Set maximum leakage in mA if a leakage sensor coil is wired | |
| Alarm telno | Comma separated list of phone numbers to receive alarms about: | |
| Trusted_telno | Comma separated list of phone numbers allowed to control the cabinet. |